Boiler vs. Furnace Cost 2026: Which Is Cheaper?
Updated October 21, 2026
Written by Rachid
Commercial Refrigeration and Air Conditioning Technician
Quick answer
There is no universal lower-cost choice between a boiler and a furnace. First establish whether you are replacing an appliance or converting the home's distribution system. Retaining serviceable ducts or hydronic piping can avoid substantial construction work, but condition and compatibility must be checked.
This guide compares residential forced-air furnaces with boilers used for space heating. The operating-cost calculator compares natural-gas appliances only; it does not compare gas with oil, electricity, or a heat pump.
What Is the Difference?
A furnace heats air and uses a blower to move it through ducts. A hot-water boiler heats water for compatible radiators, baseboards, radiant floors, or fan coils. Steam boilers are a separate system type with different piping, controls, and service requirements.
A boiler may also support domestic hot water through a suitable design, but that function is not included automatically. An electric furnace or boiler is also a different fuel-cost comparison from the gas examples below.
| Project factor | Furnace | Hot-water boiler |
|---|---|---|
| Distribution | Supply and return ducts. | Piping and compatible heat emitters. |
| Replacement assessment | Airflow, ducts, venting, controls, and equipment sizing. | Piping, emitters, water temperatures, controls, and equipment sizing. |
| Cooling | Suitable ducts may serve separately installed central cooling. | A heating boiler does not produce cooling; plan another solution. |
| Major conversion work | Adding ducts, returns, registers, and access paths. | Adding piping, emitters, zones, and access paths. |
Installed-Cost References
This Old House's published boiler-replacement guide gives US$4,500–US$10,000 as an installed reference range. HomeAdvisor's furnace-replacement guide reports US$2,823–US$6,897. These are different datasets and project definitions, not matched quotes proving one option is cheaper for your home.
Sources: This Old House boiler cost guide and HomeAdvisor furnace cost guide.
A distribution conversion, difficult access, fuel change, new venting, electrical work, permits, or major building restoration can move the project outside a published appliance-replacement range. Obtain complete local proposals before budgeting a conversion.
Replacement and Conversion Are Different Projects
Replacing a Furnace with Compatible Forced-Air Equipment
Existing ducts may be reusable if their condition and performance suit the selected equipment. Ask for an airflow assessment and identify required returns, transitions, filtration, and duct changes.
See our ductwork replacement guide.
Replacing a Boiler While Retaining Hydronic Distribution
Ask whether the existing piping, emitters, circulators, expansion arrangement, controls, and water conditions suit the proposed boiler. A replacement should be designed around the home's load and distribution requirements rather than simply copying the old capacity.
For condensing equipment, ask how the proposed operating water temperatures affect expected performance. A high rated AFUE is not a promise of identical efficiency under every installed condition.
Converting Between Air and Water Distribution
Request a separate price for distribution construction and finish repairs. A boiler-to-furnace conversion may need supply ducts, returns, registers, filter access, and equipment space. A furnace-to-boiler conversion may need extensive piping and room emitters.
Compare that full scope with retaining and improving the existing distribution system. An appliance-only price cannot answer the question.
Which Uses Less Fuel?
For gas-fired equipment, AFUE describes seasonal fuel-conversion efficiency under a standardized rating procedure. It does not include blower or circulator electricity or fully describe distribution losses.
Two appliances with the same AFUE and the same required appliance heat output have the same simplified fuel-input calculation. The labels “boiler” and “furnace” alone do not establish annual cost.
ENERGY STAR requirements vary by product and, for some furnaces, region. Check the exact model's certification rather than assuming one AFUE threshold applies to every heating appliance.
A Transparent Example
Assume each appliance must produce 60 MMBtu/year of useful heat at the appliance output, before distribution losses. One MMBtu equals one million Btu.
- 90% AFUE: 60 ÷ 0.90 = approximately 66.7 MMBtu of fuel.
- 95% AFUE: 60 ÷ 0.95 = approximately 63.2 MMBtu of fuel.
The 95% option uses approximately 5.3% less fuel for that equal output. At an illustrative US$1.50/therm, the annual fuel costs are approximately US$1,000 and US$947. This isolates efficiency; it does not establish that furnaces in general cost less to operate than boilers.
Gas Heating Fuel-Cost Calculator
Enter the same appliance-output requirement for both options. This isolates AFUE and gas price. If distribution losses differ materially, a separate system-energy assessment is needed.
Use the selected currency for the gas price. No exchange-rate conversion is performed. Convert cubic-metre or GJ billing prices to a per-therm price before entry. Equipment capacity in Btu/h is not annual energy in MMBtu.
Furnace gas use:
Boiler gas use:
Furnace fuel cost:
Boiler fuel cost:
Difference:
Estimate only. Excludes distribution losses, auxiliary electricity, fixed charges, domestic hot water, installation, maintenance, financing, and repairs. Seasonal losses represented by AFUE are included through the entered rating; additional field effects are not separately simulated.
Comfort and Cooling Requirements
Forced-air comfort depends on airflow, register placement, controls, and duct distribution. Hydronic comfort depends on emitter sizing, water temperatures, zone controls, and system balance. Neither method guarantees even room temperatures without suitable design.
A furnace does not generate cooling, although suitable ducts may support central AC or a ducted heat pump. A heating boiler also does not generate cooling. A boiler-heated home may use ductless equipment or another separately designed cooling system.
Existing radiators or radiant floors should not be assumed suitable for chilled-water cooling; condensation control and emitter suitability require a separate design.
Compare cooling alternatives in our mini-split versus central air guide.
Maintenance and Domestic Hot Water
Request equipment-specific service requirements and annual prices. Furnace work may involve filters, blowers, combustion, venting, and controls. Boiler work may involve combustion, circulators, pressure-related components, piping, and controls. Steam equipment requires a steam-specific scope.
If the boiler also supplies domestic hot water, include that service in both alternatives. A space-heating-only furnace quote is not equivalent to a boiler proposal that also replaces the water heater.
Use our maintenance budgeting guide to separate planned service from repair reserves.
Include a Heat Pump Where Relevant
A heat-pump alternative may change both heating and cooling costs. Evaluate local energy prices, equipment performance at winter design conditions, distribution compatibility, electrical work, and backup needs.
An air-source hydronic heat pump should not be assumed to work efficiently with every existing high-temperature radiator system. Its required water temperatures and available heat output must be assessed.
Related guides: heat pump versus furnace costs and backup heating.
Compare the Complete Proposal
- Exact equipment model, fuel, capacity, and AFUE.
- Load calculation and equipment-selection basis.
- Distribution assessment and required modifications.
- Venting, combustion air, drainage, fuel, and electrical work.
- Controls, zoning, and any domestic-hot-water functions.
- Cooling provision where required.
- Access, demolition, restoration, removal, and permits.
- Startup, commissioning, warranties, taxes, and exclusions.
Canadian homeowners should obtain local CAD quotes rather than converting U.S. references. For either country, verify current incentive eligibility with the administrator before including a benefit in the budget. Do not assume an older article's tax-credit information still applies.
Safety
Gas, oil, combustion, venting, electrical, boiler-pressure, and safety-control work should be performed by appropriately qualified professionals following manufacturer and local requirements. Do not alter relief devices or bypass controls.
If a carbon-monoxide alarm sounds or you suspect a gas leak, leave immediately and call emergency services or the gas utility from a safe location outside. Do not investigate or re-enter until responders say it is safe.
Frequently Asked Questions
Is a boiler always more expensive?
No. The complete project depends on the existing distribution and the work required. Appliance price alone cannot establish the cheaper option.
Is boiler heating automatically more efficient?
No. Compare actual ratings, distribution performance, electricity use, controls, and installed conditions.
Can I keep my radiators with a new boiler?
Possibly. Have the piping, emitters, operating temperatures, and proposed boiler design assessed before assuming compatibility.
Which lasts longer?
Service life varies with design, installation, maintenance, operating conditions, water quality where relevant, and parts availability. A universal lifespan does not establish the best choice for your home.
Sources and Methodology
- This Old House — Boiler replacement cost reference
- HomeAdvisor — Furnace replacement cost reference
- ENERGY STAR — Boilers
- ENERGY STAR — Furnaces
- DOE — AFUE definition and auxiliary electricity
- Health Canada — Carbon-monoxide safety
Methodology: Published cost references use different project samples and scopes; they are not matched bids or a NorthAir price survey. Calculator defaults are hypothetical. Fuel cost equals annual appliance heat output in MMBtu × 10 ÷ fractional AFUE × price per therm. Values are calculated before display rounding. The calculator isolates appliance fuel use rather than total ownership cost.
Author background: Rachid is based in Morocco and has approximately nine years of professional experience in commercial refrigeration and air conditioning. U.S. and Canadian market information is researched from cited references.
Comments
Post a Comment