HVAC Replacement Cost Calculator (2026).
A clearer starting point for your next system
HVAC Replacement Cost Calculator (2026)
Explore a planning range for your home’s next heating or cooling system. See what goes into equipment, installation, and ductwork before you request local quotes.
Illustrative estimate. These editable assumptions are not verified 2026 market prices or a contractor quote.
Tell us about your project
Five details. One transparent estimate.
Your planning range
Equipment + installation + ductwork
Choose your project details and select Calculate my range to see an estimate.
Estimated total replacement cost
Illustrative USD range · before taxes and incentives
- Equipment
- Labor & installation
- Ductwork adjustment
How this range is calculated
Selected ductwork scope
Budget guidance, not a guaranteed price. Get itemized quotes from licensed, insured HVAC contractors and compare the same equipment and scope.
Make your next quote easier to compare.
Ask for model numbers, efficiency ratings, permits, warranties, and a written scope of work.
Transparent assumptions, informed decisions
What the estimate includes
Illustrative equipment allowances for a central ducted system, ordinary removal, connection and commissioning labor, and the selected ductwork allowance. Standard installation assumes accessible equipment and serviceable connections.
What can change your quote
Brand, efficiency, home layout, duct length, local wages and code requirements. Taxes, permits, rebates, financing, electrical panel upgrades, new gas service, major venting changes, hazardous-material remediation, and structural work are excluded. Complex installation adds a labor allowance; it does not price every possible upgrade.
Correct sizing comes first
Tons describe cooling capacity, not equipment weight. Furnace selections use rated gas input in BTU/h; useful heat output depends on efficiency. For a combined system, the tonnage is for AC only; the furnace uses a flat allowance and must be sized separately. Request a professional load calculation, not a rule based only on square footage.
See cost model, date, and reference sources
Assumption date: . Calculator and model v1.2 retain all earlier equipment, HVAC installation, regional and complexity coefficients, reuse allowance, and complete-replacement allowance as illustrative. Only the former broad duct-modification category is replaced with the narrower minor sealing/repair category and its source-informed illustrative allowance. No live pricing feed or independently audited 2026 transaction dataset was used. This is a model revision date, not price verification.
Equipment = base allowance + capacity × per-unit allowance, plus the flat furnace allowance for AC + furnace. Installation = (base labor + capacity × per-unit labor) × regional factor × complexity factor. Ductwork = selected allowance × regional factor. Furnace capacity is divided by 1,000 before applying the per-unit rate. Each component is rounded to whole dollars, with exact half-dollars rounded up, then added.
| System | Equipment base / per unit | Labor base / per unit |
|---|
Minor duct sealing/repair benchmark — illustrative, low calibration confidence
HomeGuide's two guides below state “Minor duct sealing and repairs cost $300 to $1,500.” The owner-approved D1 assumption uses that benchmark for the narrower scope explained above. The source does not itemize or verify this exact work inventory, local rates, exclusions, or the model's regional scaling. Two pages from one publisher are not independent confirmation. A publication/update date is not a transaction-collection period.
- HomeGuide: AC replacement cost — initial publication October 18, 2022; updated July 25, 2025; retrieved October 13, 2026.
- HomeGuide: gas furnace prices — initial publication October 18, 2022; updated December 31, 2025; retrieved October 13, 2026.
Other retrieved categories differ: the HomeGuide duct guide (updated December 19, 2025) lists minor jobs at $200–$700, manual sealing at $400–$1,900, and aerosol sealing at $1,300–$2,700. Angi's duct guide (updated May 30, 2026) gives $300–$1,000 for minor issues. All were retrieved October 13, 2026. These categories were not averaged or imported as broad duct-modification prices.
Complete duct replacement remains the original illustrative $2,500–$6,500 base allowance. Length, layout, material and access are not measured here, so a contractor quote can fall outside it. Regional factors remain illustrative: the adjusted minor-repair range is not verified local pricing. Complex installation affects HVAC installation only, not this duct allowance.
Technical references — not price sources
- ENERGY STAR: HVAC Quality Installation — system selection and sizing guidance.
- ENERGY STAR: Air-Source Heat Pumps — heat-pump operation and installation context.
- ENERGY STAR: Furnaces — furnace efficiency and safety context.
- ACCA Manual J — residential load-calculation reference.
These references do not substantiate the dollar amounts or regional factors above. Confirm actual installed prices with current local contractor quotes.
Source-review limitations (October 13, 2026): After Internet access was enabled, 16 cost pages and a methodology page were retrieved, with source conflicts and incomplete equipment/installation scope documented. Other requests returned 403/404 errors or unrelated/incomplete content and were excluded. The DOE links above returned 404 in that review; ACCA was reachable as sizing context. Retrieved publisher statements and dates do not independently validate the original model coefficients, this exact minor-repair scope, or 2025–2026-only market transactions. All estimates remain illustrative.
How to estimate HVAC replacement costs in 2026
Choose a central AC, ducted heat pump, gas furnace, or combined AC and furnace replacement. Select a supported equipment capacity, broad U.S. region, installation complexity, and ductwork scope. The calculator adds illustrative equipment, labor, and ductwork allowances to show a low-to-high budget range in USD.
Use this result as a starting point, not a bid. The model does not calculate heating and cooling loads, verify 2026 local market prices, or include taxes, permits, rebates, financing, and major electrical or structural work. Compare several itemized local contractor quotes before deciding.
For more detail, read our central AC replacement cost guide, heat pump installation cost guide, and ductwork replacement guide.
Common replacement questions
How much does it cost to replace an HVAC system?
Costs depend on the equipment, capacity, efficiency, installation conditions, and local market. This tool shows an illustrative planning range, not verified local prices. Obtain several written quotes for your specific home.
Can I reuse my existing ductwork?
A contractor should inspect duct condition, sizing, leakage, and airflow. Serviceable ducts may be reused; damaged or unsuitable ducts can require repair or replacement. Selecting reuse here adds no allowance for those repairs.
Does minor duct sealing or repair include duct modification or partial replacement?
No. It covers localized accessible leaks, loose connections, small patches and limited sealing only. Modification, resizing, rerouting, new branches, partial replacement, complete replacement, whole-system/aerosol sealing, insulation packages and remediation need a separately scoped quote. Do not select a narrower scope merely to obtain a lower estimate.
What size HVAC system do I need?
Use a professional residential load calculation, such as ACCA Manual J. Existing nameplate capacity is a starting reference, not proof that the replacement should be the same size.
Does the estimate include rebates or tax credits?
No. Taxes, rebates, credits, and financing are excluded. Incentive eligibility and availability change; verify current terms with the program administrator before making a purchase.
Comments
Post a Comment